Publications

  • Home /
  • Departments /
  • Achievements /
  • Publication Details

Publication Details

Journal Title Author Type Description Year
Influence of determinant factors towards soil erosion using ordinary least squared regression in GIS domain Dr.JAHIER ABBAS SHAIKH Scopus Applied Geomatics, Springer Link 2021
Simulation and Analysis of a Quadrotor UAV while Landing Dr.JAHIER ABBAS SHAIKH NIL International Journal of Recent Technology and Engineering (IJRTE) 2020
Experimental Research and Optimization of Cutting Parameters for High Speed Machining Dr.JAHIER ABBAS SHAIKH NIL International Journal of Innovative Technology and Exploring Engineering (IJITEE) 2020
Development and optimization of cold rolled slitting machine process Dr.JAHIER ABBAS SHAIKH Scopus Materials Today: Proceedings, Science Direct 2020
Data Analytics in Master Cam Setup Sheet for Improved Manufacturing Dr.JAHIER ABBAS SHAIKH NIL International Journal of Engineering and Advanced Technology (IJEAT) 2020
Experimental investigation of pumping power and effectiveness of car radiator using nanofluid Dr.Patil Pradeep Scopus International Journal Impact and Innovation in Mechanical Engineering 2019
Effective Thermal Conductiovity of Polymer composites: A review of analytical methods Dr.Patil Pradeep Scopus International Journal Published online 2 Jan 2019 2019
Experimental Investigation of Physical and Mechanical Properties of Steel Powder Filled Disc Brake Friction Materials Dr.Patil Pradeep Scopus International Journal J. Phy. Sci. Vol. 30(2), 81–97, 2019 2019
Numerical investigation on the performance of thermo-acoustic engine using a vertical heater Dr.Patil Pradeep Springer International Journal International Journal of Ambient Energy 2019
An experimental study to investigate the dynamic behaviour of thermal conductivity for different concentrations of Al2O3 nanofluid Dr.Patil Pradeep International Journal International Journal of Ambient energy 2019
Investigation of erosion phenomena and influencing factors due to the presence of solid particles in the flow: a review Dr.Patil Pradeep International Journal International Journal of Ambient energy 2019
Damage of nanoparticles and pipe surface due to the interaction of a nanofluid with system components—an experimental study Dr.Patil Pradeep Springer International Journal Heat Transfer Research 2019
Performance improvement in opposed Piston Linear Compressor for household refrigerator by reducing clearance volume Dr.Phadkule Suneeta International Journal International Journal of Ambient Energy 2019
ADVANCE MANUFACTURING PROCESS FOR CONVENIENT AND OPTIMIZE PRODUCTION Prof.Priyanka Barde Published/international Latest advanced manufacturing techniques are introduced 2019
Effective Thermal Conductiovity of Polymer composites: A review of analytical methods Dr.Kosbe Pradnya SCOPUS International Journal of Ambient energy (Taylor and Francis) 2019
Experimental Investigation of Physical and Mechanical Properties of Steel Powder Filled Disc Brake Friction Materials Dr.Kosbe Pradnya SCOPUS J. Phy. Sci. Vol. 30(2), 81–97, 2019 2019
Numerical investigation on the performance of thermo-acoustic engine using a vertical heater Dr.Gaikwad Mahesh SCOPUS International Journal of Ambient Energy 2019
IMPROVING AXIAL LOAD CARRYING CAPACITY OF COMPOSITE I-BEAM SECTION Dr.JAHIER ABBAS SHAIKH NIL European Journal of Molecular & Clinical Medicine 2019
Design and manufacturing of travelling wave thermo-acoustic engine with varying regenerator length Dr.Patil Pradeep Scopus International Journal International Journal of Ambient Energy 2018
Resonance analysis of opposed piston linear compressor for refrigerator application Dr.Phadkule Suneeta International Journal International Journal of Ambient Energy 2018
Design and manufacturing of travelling wave thermo-acoustic engine with varying regenerator length Dr.Gaikwad Mahesh SCOPUS International Journal of Ambient Energy 2018
Converting Manually Operated Die into Automation Mode By Using Robotic Vacuum Gripper. Prof.Priyanka Barde Published/international Robotic Griper is use for manufacturing 2018
Differentiating performance of solar water heater under natural and forced circulation Prof.Priyanka Barde Published/international Difference between natural and forced convection is defined 2017
Resonance Analysis of Valved Linear Compressor for Refrigeration Application Dr.Phadkule Suneeta International Journal ARPN Journal of Engineering and Applied Sciences 2016
Experimental Investigation of Trapezoidal Duct using Delta Wing Vortex Generators Prof.Talwar Shivanand International Journal Engineering Research Publication 2016
Experimental Study of Heat Transfer Enhancement in a Rectangular Duct Channel with delta Wing Vortex Generators Prof.Talwar Shivanand International Journal Engineering Research Publication 2016
Analysis of heat exchanger for automobile thermoelectric generator Prof.Gulwade Shekhar International journal Journal of Emerging Technologies and Innovative Research (JETIR), 2016
Design and static analysis of composite leaf spring Dr.Yadav Amol International journal Published online 2 July 2016 2016
Optimization of process planning of Ginning a machine component Prof.Priyanka Barde Published/international Open loop Optimization is use for convinient manufacturing 2015
EXPERIMENTAL VALIDATION OF BEST SUITABLE MECHANISM FOR MANUALLY POWERED LILLIPUT GIN Dr.Alone Nilesh International Journal International Engineering Journal For Research & Development,E-ISSN No:2349-0721 2015
Parameter optimization of TIG welding using Austenitic stainless steel Prof.Gulwade Shekhar International journal International Journal of Innovative and Emerging Research in Engineering, 2015
Comparative study between heat transfer through laminar flow and turbulent flow Dr.Yadav Amol International journal International Journal of Innovative Research in Science, Engineering and Technology, 2015
An Overview of Economic and Production Characteristics for Cotton Production Dr.Alone Nilesh International Journal IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), e-ISSN: 2278-1684, p-ISSN: 2320-334X 2014
The Effect of insertion of different geometries on heat transfer performance in circular pipe- A review Dr.Yadav Amol International journal International Journal of Modern Engineering Research 2014
Waste Heat Recovery from Internal combustion Engines: A review Dr.Kadam Prakash International Journal International Journal of Multidisciplinary Research & Advances in Engineering (IJMRAE), ISSN 0975-7074, Vol.5, No. IV 2013
Waste Heat Recovery System Stationary C. I. Engine Dr.Kadam Prakash International Journal International Journal of Multidisciplinary Research & Advances in Engineering (IJMRAE), ISSN 0975-7074, Vol.5, No. IV 2013
Increase In The C.O.P. and Reduction in The Condenser Size Of NH3 V.C.R. Cycle by Means of the Liquid Injection In The Compressor & Use of Centrifugal Compressor Dr.Kadam Prakash International Journal International Journal of Engineering Research & Industrial Applications (IJERIA), ISSN 0974-1518, Vol.6, No. IV 2013
Design and Analysis of Composite Drive Shaft Dr.Kadam Prakash International Journal International Journal of Engineering Research & Industrial Applications (IJERIA), ISSN 0974-1518, Vol.6, No. IV 2013
Concept of Green House Effect in Solar Flat Plate Collector Dr.Kadam Prakash International Journal International Journal of Engineering Research & Industrial Applications (IJERIA), ISSN 0974-1518, Vol.6, No. IV 2013
Tribological Study of Different Mill Journal Bearing Materials Against Sugar Mill Shaft material Dr.Kadam Prakash National Journal The South Indian Sugarcane and Sugar Technologists’ Association-Chennai (SISTA), 37th Annual Convention 2006
Environmental Pollution-Role of an Engineer Dr.Kadam Prakash National Journal THE INSTITUTION OF ENGINEERES (INDIA), NASHIK LOCAL CENTRE, Celebrates 37th Engineers Day on the Theme Engineers in Environmental Protection 2004
Conference Title Author Type Description Year
Recent Developments in Hybrid Renewable Energy Technologies for Power Generation Dr.Kosbe Pradnya International Conference Scopus Renewable Energy Sources 2020
Two Days National Conference on “Advancements in Mechanical Engineering and Industrial Management-2019” (NCAMEIM 2019) Prof.Priyanka Barde Presented , National ADVANCE MANUFACTURING PROCESS FOR CONVENIENT AND OPTIMIZE PRODUCTION 2019
Three-dimensional printing technology application & comparison with conventional manufacturing Dr.Kadam Prakash International Conference “ICKDST-18”, sponsored by Savitribai Phule Pune University, Pune, IEEE Education Society & IEEE Computer Society 2018
National Level Conference on Recent Advancements in Mechanical Engineering [NCRAME -2015] Prof.Kharade Vijay PGCON PGCON, AISSMS ,PUNE 2018
Two Days National Conference on “Advancements in Mechanical Engineering and Industrial Management-2019” (NCAMEIM 2019), Prof.Mohammed Irfan Shamshoddin Pathan Published, National Converting Manually Operated Die into Automation Mode By Using Robotic Vacuum Gripper. 2018
11th International Conference on Recent Innovations in Science, Engineering and Management (ICRISEM-18) Prof.Priyanka Barde Presented ,International Converting Manually Operated Die Into Automation Mode By Using Robotic Vacuum Gripper. 2018
Analysis of heat exchanger for waste heat recovery of an engine exhaust Prof.Gulwade Shekhar National Conference Second Mechanical Engineering Post Graduate Students Conference 2016
National Conference on “Recent Advances in manufacturing” at SVNIT ,Surat Prof.Avati Vijaya National Conference National Conference 2016
A Review on Parametric optimization of Horizontal rectangular fin under natural convection heat transfer from a radial heat sink. Prof.Gulwade Shekhar International Conference “Recent Advances in Mechanical Engineering”, Pune 2015
Parameter optimization of TIG welding using Austenitic stainless steel Prof.Gulwade Shekhar International Conference Mechanical Engineering Post Graduate Conference, Amravati, 2015
Waste heat recovery System for C.I. Engine Dr.Kadam Prakash International Conference 3rd International Conference on Computational Intelligence, (ICCCIA 2012), Sandip Institute of Technology & Research Center, 2012
New Trends In Supply Chain Management, Marketing Channels Of Distribution, Logistics And Purchasing Dr.Kadam Prakash National Conference National Conference on Emerging Trends in Engineering & Technology Jointly organized by IETE, NIIT & Computer Society of India 2011
Development of rapid prototype model of the femoral component of artificial human knee prosthesis Dr.Gaikwad Mahesh International Conference International Conference on Innovative Science and Engineering Technology, ICISET-2011, V. V. P. Engg. College, Rajkot, Gujrat, ISBN: 978-81-906377-9-4. 2011
Application of strain rossets for static strength analysis of artificial human knee prosthesis Dr.Gaikwad Mahesh International Conference National Conference on Research Development in Mechanical Engg. (RDME-2011), Modern Education Society’s COE, 2011
Static strength analysis of the artificial human knee prosthesis using FEA Dr.Gaikwad Mahesh International Conference National Conference on Current trends in Biologiocal Sciences, Seva Sadan’s R. K. Talreja College, Ulhasnagar 2011
Artificial Intelligence Is A Evolutionary Approach To Design Process Dr.Kadam Prakash National Conference National National Conference on Communication, Information Technology & Automation (NCCITA-08), organized by Parshvanath College of Engineering, Thane, India 2008
A Review of Modeling and Simulation of Pulsating Heat Pipes For Electronic Cooling Applications Dr.Kadam Prakash National Conference National Conference on Communication, Information Technology & Automation (NCCITA-08), organized by Parshvanath College of Engineering, Thane, India 2008
Advances in Manufacturing process to improve the fatigue resistance of the sugar mill roller Dr.Kadam Prakash International Conference International Conference on Andvances in Manufacturing & Technology Management – 2007(ICAMTM 2007), organized by Parshvanath College of Engineering, Thane in Association with University of Mumbai, India 2007
Modal Analysis of Sugar Mill Housing Dr.Kadam Prakash International Conference International Conference on Andvances in Manufacturing & Technology Management – 2007(ICAMTM 2007), organized by Parshvanath College of Engineering, Thane in Association with University of Mumbai, India 2007
The Benefits of Bagasse Cogeneration - An Indian Scenario Dr.Kadam Prakash National Conference One day National level seminar on Co-Generation in sugar industry, organized by Department of Sugar Technology & Community Service Cell, S.G.G.S. Institute of Engineering & Technology, Vishnupuri, 2007
Color Formation In Sugar Cane Juice- A laboratory Study on the Effect of Glass Dr.Kadam Prakash National Conference National State level seminar on New Horizons in Chemistry, organized by P.G., Department of Chemistry, L.B.S. Mahavidyalya, Dharmabad, Dist. Nanded 2002
Book Title Author Publisher Year
Fluid Mechanics Dr.Patil Pradeep Technical 2018
Refrigeration and Air-conditioning Dr.Patil Pradeep Technical 2018
Patent Details Author/Inventor Year
Copper free brake friction material for disc brake pad Dr.Kosbe Pradnya 2019
Applied for Copyright on “One Page report” (Diary Number: 17923/2019-CO/L) Dr.Kadam Prakash 2019
Design patent on “Structure of Nano satellite” (CBR No. 11545) Dr.Kadam Prakash 2018
Copper free brake friction material for disc brake pad Dr.Patil Pradeep 2018
Travelling wave thermo-acoustic Engine Dr.Gaikwad Mahesh 2018
Travelling wave thermoacoustic engine Dr.Patil Pradeep 2017
A Valved Opposed Piston Linear Compressor. Application No: 201623007432 Dr.Phadkule Suneeta 2016
Flexure Spring Application No. : 3053/MUM/2015 Dr.Phadkule Suneeta 2015